Poultry
xClose

Loading ...
Swine
xClose

Loading ...
Dairy & Ruminant
xClose

Loading ...
Aquaculture
xClose

Loading ...
Feed
xClose

Loading ...
Animal Health
xClose

Loading ...
Spotlight


October 11, 2018


New Zealand company develops device that detects dairy processing losses

 


Lincoln Agritech Ltd, an R&D company owned by Lincoln University (New Zealand), had developed a new device that can detect processing losses in dairy plants, the company announced in September.

 
The device, known as Milk-Guard, could potentially save the dairy industry millions of dollars a year and help prevent pollutants from entering waterways.

 
Milk-Guard was commercialised by Christchurch-based start-up company, CertusBio, and was promoted by Lincoln as "a robust, automated biosensor capable of continuous monitoring in commercial operating conditions."

 
The device uses a lactose-specific enzyme to measure the percentage of dairy products present in waste streams and processing lines. These percentages are automatically sent to a dairy plant process control room, where operators can monitor them and make changes to the production process if necessary.


CertusBio CEO Dr. Matthew Jones said that, due to the vast quantity of dairy products processed in New Zealand, large amounts of valuable products could be lost quickly.
 

"Given the significant economic return to New Zealand from the dairy industry, it is vital to extract as much value from dairy processing as possible by using reliable, fully automated systems to accurately and rapidly monitor losses in dairy processing waste streams," he explained.


"Dairy plant operators will be able to improve the resource and energy efficiency of their plant processes by reducing losses of valuable dairy products and ultimately increasing company profitability."


Dr. Jones said current loss-monitoring methods were reliant on retrospective testing collected over 24 hours.


"Because this testing is done after the dairy products have been processed, it doesn't allow for adjustments to be made while the plant is operating, so losses can't be limited in real time," he added.
2-3% of all dairy products are lost during processing and while this is inevitable to a certain extent, a significant proportion of losses could be avoided.

 
"The estimated total loss for an average dairy industry processing line is $6.5 million per year," said Dr Jones. "This also contributes to the level of pollutants caused by the dairy processing industry, as dairy plant wastewater has a number of characteristics that require careful management, including influent pH swings of 2-13, high fat loads and variable incoming organic and nutrient loads. Variations occur both on a seasonal and daily basis."

 
According to Water NZ, irrigation is the most commonly used method in the country for treating dairy processing wastewater. Soils must have good infiltration capacities because if the infiltration rate is too low, then wastewater will pond on the surface of the land.

 
Wastewater can then undergo anaerobic decomposition, resulting in odours, acidification and damage to the plant cover. If infiltration rates are too high, then the wastewater will spend insufficient time in the top soil to receive adequate treatment, leading to possible groundwater contamination.

 
Trials at dairy processing plants have demonstrated Milk-Guard's ability to frequently detect product losses during processing, which could be worth in excess of NZ$30,000 (US$19,434) for a single event.


"Milk-Guard is the first interference-free continuous monitoring device aimed at the dairy processing industry. The biosensor puts control in the hands of process operators to dramatically reduce processing loses," said Dr. Jones.

 
CertusBio has demonstrated that its lactose biosensor technology is robust enough for continuous monitoring applications where a single sensor can be used to make thousands of precise measurements within dairy plant wastewater. The technology relies on a "biosensor cartridge system" similar to a standard printer cartridge to increase the reproducibility of measurements and reduce maintenance requirements for process operators. Cartridges are replaced on a monthly basis via courier with used cartridges being recycled for further use by CertusBio.

 
In addition to wastewater monitoring to reduce processing losses, the Milk-Guard device can be used to account for all material entering and leaving a processing plant, liquid transfers within a plant, and segregating raw materials containing high value products.

 
The combination of those functions is expected to provide a significant return on investment for dairy processors.

 
Dr. Jones said CertusBio is seeking additional investors and a wider range of dairy processors to further demonstrate the economic and environmental benefits of the technology.

 
"Excellent traction has been made with the New Zealand dairy industry, but as with any new technology, significant investment is required to bring it to the market quickly. Our next step is to expand the testing of the technology to international dairy processors and make on impact on a global scale," he commented.

 
- Lincoln Agritech Ltd

Share this article on FacebookShare this article on TwitterPrint this articleForward this article
Previous
My eFeedLink last read